the reason for the knot of the steel rope in the tower CRANE


The high height of the steel wire rope in the tower is tied because the wire rope is caused by the load and its own weight. For non-rotating wire ropes, the rope must be correctly rolled before the rope is used. When it is involved in the reel, it should be operated at a slow speed, so that the wire ropes are arranged in a circle, and there must be no confusion.
The working length of the wire rope is all loose. With the increase of load and drape length, the torsion and knotting degree of the wire rope will increase. Therefore, it is necessary to put the rope in the right way to ensure that the knot of the steel rope in the tower will not happen.

SR28ER Basic Mast

Получить последнюю цену? Мы ответим как можно скорее (в течение 12 часов)